Portrait Mode Payment Terminal Board with Fingerprint Module, WF-SPT-11

TL;DR: Portrait Mode Payment Terminal Board with Fingerprint Module

AndroidSBC OEM partnership announcement extending smart payment terminal board availability serving international market, Spain. The WF-SPT-11 smart payment terminal Android motherboard covers the multimedia payment terminal build with customer screen and eleven sister configurations in the WF-SPT series, spanning the H618 quad-core ARM Cortex-A53 1.5GHz SoC with the ARM Mali-G31 MP2 GPU, 6-inch 1080x1920 MIPI DSI plus HDMI 2.0a customer screen output, and Android 12 with AOSP baseline and optional GMS firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-SPT family from the Longgang source factory in Shenzhen to international market and Spain importers who build countertop payment terminals, self-service kiosks, unattended vending and locker machines, transit ticketing gates and outdoor charging pillars.

About AndroidSBC and the Smart Payment Terminal Android Motherboard Family

AndroidSBC is the export brand of Wanlin Manufacturing Group, a Shenzhen source-factory group that has spent more than a decade on Rockchip and Allwinner payment hardware. The smart payment terminal Android motherboard family covered in this release is the WF-SPT line, twelve configurations built around one peripheral contract so a international market integrator can qualify a printer, a reader and a scan engine once and then move across the whole range. Every configuration ships with the same Android build, the same peripheral contract and the same test report format, so a international market quality team that has signed off one WF-SPT board can read the next one without a new learning curve.

WF-SPT-11 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-SPT-11 (multimedia payment terminal build with customer screen) holds the touch panel, the thermal printer, the reader and the scan engine together while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For Spain importers sourcing the WF-SPT family, the WF-SPT-11-A variant is the typical configuration for the cinema, stadium and theme park ticketing counters use case, in a payment terminal footprint with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Smart Payment Terminal Android Motherboards for Spain Buyers

The hidden cost in Spain rollouts is the integration labour, not the silicon. A board that arrives with a validated printer profile, a documented scan mapping and an SDK that matches the shipped image removes weeks from a international market project plan.

Then there is the peripheral question. international market integrators buy printers, scanners and readers from local distributors, and a board whose driver stack was never validated against those specific mechanisms pushes the integration risk onto the Spain partner. AndroidSBC holds the 64400 board sample lot, the production slot and the compliance file on one schedule for international market, so the 2nd release of the quarter is a shipment rather than a negotiation.

Competitive Comparison: WF-SPT-11 vs Competing Smart Payment Terminal Motherboards

This is the comparison AndroidSBC runs with Spain acquiring partners during qualification: what the board documents, what the board validates, and what the board can still do twelve months after the first pallet lands in international market.

• vs consumer tablet boards: the WF-SPT family carries a printer control header, a reader antenna reference design and a scan engine UART mapping, none of which exist on a tablet derivative board.
• vs single-configuration boards: twelve configurations share one peripheral contract, so a international market buyer can move from a countertop lane to an unattended kiosk without re-qualifying the printer or the reader.
• vs boards without a firmware plan: signed images, staged OTA groups with rollback and a published maintenance window come standard, where competing boards ship an image and leave the Spain integrator to manage it.
• vs re-spun designs: the bill of materials is frozen per production lot for the length of the agreement, so the board that passed qualification in international market is the board that ships in volume.

Global Cashless Payment, Smart Terminal and Self-Service Checkout Market Trends

For international market integrators the market signal is simple - contactless and QR now carry the majority of face-to-face volume in Spain, so the board is specified around the reader and the camera first and the keypad second.

• Countertop tier: WF-SPT-01 covers contactless, IC card, QR and receipt printing in one board, which is the configuration most staffed lanes standardise on.
• Unattended tier: WF-SPT-08 pairs the modem with the printer header and the watchdog for vending, lockers and kiosks where nobody is there to reboot the terminal.
• Flagship tier: WF-SPT-11 adds the larger memory and storage bundle, the customer-facing screen option and the wider temperature window that outdoor and high-throughput formats require.

The Spain demand curve rewards the vendor who can hold a configuration. AndroidSBC treats a frozen bill of materials as the product feature that matters most to a international market integrator with an estate to maintain.

WF-SPT-11 Application Scenarios

The WF-SPT-11 multimedia payment terminal build with customer screen sits inside a twelve-configuration WF-SPT Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-SPT-11-A configuration is the typical build for the cinema, stadium and theme park ticketing counters use case, with printer current profile, scan engine mapping and staged OTA management bundled.

• Convenience and grocery counters: the WF-SPT-12 takes contactless, IC card and QR at the till and prints the receipt in one pass.
• Restaurant and quick-service counters: the WF-SPT-11 runs order entry, payment and kitchen ticket printing on the same board.
• Unattended vending and lockers: the WF-SPT-03 pairs the modem with the printer header and the watchdog for sites with no staff present.
• EV charging and fuel forecourts: the WF-SPT-09 holds the wide input range and the sunlight readable panel through a full outdoor season.
• Transit gates and event entry: the WF-SPT-04 takes contactless payment and prints the entry ticket without a fixed counter.
• Self-checkout lanes: one board drives the main panel, the scanner and the receipt printer, with the customer screen option where the format needs it.
• Hotel and resort reception: card pre-authorisation, signature capture and folio printing on a board that also runs the restaurant terminal.
• Hospital and clinic payment desks: card, QR and insurance capture on a locked-down build with staged OTA and an audit trail.
• Government and municipal counters: tax, permit and fee payment on a configuration held for the length of the agreement.

Partnership Models for international market Buyers

AndroidSBC publishes these three tracks because Spain partners ask the same question in every first call: how much of the work do we take, and how much do you take.

• Distribution track: the partner buys the WF-SPT board against a published price list, keeps its own stock, and AndroidSBC supplies the printer profile, the scan mapping and the compliance documents with each lot.
• Integration track: the partner takes the board plus firmware customisation, receipt and language localisation and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-SPT board ships under the partner brand with customised boot logo, packaging, enclosure and documentation, on a fixed bill of materials held for the length of the agreement.

Whichever track a international market partner chooses, the board is the same board - what changes is the documentation set, the branding and how much of the integration AndroidSBC carries in Spain.

Frequently Asked Questions

Does the smart payment terminal board family support a multimedia payment terminal build with customer screen?

Answer: Yes. AndroidSBC builds the multimedia payment terminal build with customer screen as part of the twelve-configuration WF-SPT family, so the board arrives with its test report, its certificate set and its signed firmware image for Spain.

Which configurations are available in the WF-SPT family for Spain buyers?

Answer: The WF-SPT family covers H618 and eleven sister configurations, from the value countertop build to the outdoor sunlight readable build, with one Android baseline across the range for Spain.

Can one smart payment terminal board drive a touch panel, a thermal printer and a scan engine at once?

Answer: Yes. The board runs the panel, the printer header and the scan UART at the same time, which is the configuration international market integrators validate during the joint qualification run at the Longgang factory.

What payment scheme certification support does AndroidSBC provide for Spain?

Answer: Certification support for Spain means CNMC conformity documentation, CE marking with CNMC radio interface notification test reports and a firmware signing record, all bundled into the shipment rather than sent after customs clearance in international market.

What is the minimum order quantity and the sample lead time for Spain?

Answer: MOQ depends on the track: stock configurations ship from one unit, private-label builds start at 500 boards, and both are quoted against the same frozen bill of materials for Spain.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Yes. AndroidSBC builds the custom image, validates it against the peripheral contract and ships it on the board, which removes the flashing step from the Spain integration plan.

How are firmware updates delivered to a Spain device estate after deployment?

Answer: AndroidSBC manages the Spain estate through staged OTA: signed images, grouped rollout, automatic rollback on failure and a maintenance window agreed with the international market operations team.

What shipping terms does AndroidSBC support for Spain orders?

Answer: The Spain lane runs weekly into Port of international market, and the international market buyer receives the tracking reference, the packing list and the compliance file at the same time.

Contact AndroidSBC: Start Your WF-SPT-11 Sourcing Conversation

AndroidSBC is taking new Spain partner conversations for the WF-SPT family now. Send the format, the volume and the certification calendar and the engineering team returns a configuration proposal.

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

Wanlin Manufacturing Group builds the WF-SPT family in Shenzhen and exports it through AndroidSBC to Spain and more than 60 markets. international market enquiries for samples, price lists and certification files are answered within one working day.